Inventory

To see a picture of an item, click on the item number.

Item	Description
M4996	Air Lay, DOA 2.5 meter, 1986 year, with feed system, blower fan & pressure fan, sheet former, conveyor, controls, 75 HP 230/460 volt
M4675	Air Lay, FEHRER, 2.5 meter Mdl. V-21 Feed type BW & K-12, 440 volt
M4038	Air Lay, FEHRER, 4.3 meter
M4151	Air Lay, SCHIRP, 2.2 meters wide with Feed and phanolic resin applicator.
M5172	Bagger, NEW,compact, for bagging of Draperies, Quilts, Spreads, Comforters. Totally air pneumatic, capable of handling high production, foot petal operated, 30/40 PSI compressed air.
M4894	Blending Bin,TEMAFA,Mixmaster, 1984 year, Machine #E0404195, overall outside dimensions is 10' wide, 30' long x 12' high, complete with filter house, fans, duct work & moving floor apron, Inside dimensions of the Hopper is 79", face width of the apron is 74".
L004	CALENDER, Sample, 18" wide, B.F. Perkins
M3682	Card, HERGETH, 3.6 meter, High Speed Randomizing, 1983, Type WZM/K, with double 16-1/4" doffers, (1) 16-1/4" fast cylinder, (3) top & (3) bottom 10" randomizing cylinders, (5) 16-1/4" carding cylinders with (8) 10" workers, (2) roller takeoff, 60HP 3/60/450 volt main drive with weigh system between card & feed, 1983 Cromtex 3.6 meter vibrating chute FEED, 1983.
M1961	Card, HERGETH,2.5 meter, Mdl. 641/195, 2 sets 3-1/2" feed rolls, 16" lickerin with (1) 9" worker & (1) 5" stripper, 34" breaker main with (3) 9" workers & (3) 5" strippers, intermediate doffer 34" finish main with (3) 9" workers & (3) 5" strippers, doffer with roll takeoff,Metallic clothed,Tandem Hergeth Feed with vibra chute.
M5015	Card,Compact, HERGETH, 3.35 meter, 1987, Type 335-61480, TYP:AKG-1-4, single main cylinder with (4) workers & strippers, lickerin section single doffer with roll take off, flockfeeder type VF1-135117-07, control cabinet, operating and parts manuals.
M36402	Card,HERGETH SPINBAU, 2.5 meter, 1980, with (4) 4" feed rolls, (1) 12" lickerin, 16" breast with 8" worker, 6" stripper, 16" transfer, 40" breaker main with (4) 8" workers, (4) 6" strippers, 20" intermediate doffer, 16" transfer, 40" finisher with (4) 8" workers, (4) 6" strippers, 32" finish doffer, Hergeth roll take off, with 2.5 meter Hergeth Chute FEED.
M5160	Condensor,FIBER CONTROLS,D106 x 36,Pneumatic Separator, 36" wide, 3/4 HP Drive, Inlet and outlet transition to 12" duct, RECONDITIONED.
M5093	Crosslapper,ASSELIN, 2.5 meter x 3 meter laydown, with Servoshifter on lap and variable speed drive on aprons.
M5335	Crosslapper,JAMES HUNTER Horizontal, 67" in x 105" out,complete with drives 208/230/460
M4771	Cutter,Die Press, 120", 1992 year,Manufactured by STANDARD INDUSTRIES, S#492213, Model # AV 100-10, 123" x 30" Platen, 100 ton, 13" stroke, hydraulic cuts up to 3/8" compressed thickness,for roll goods or out of buggies.
M3299	Cutter,Die Press,ORMONT,Mdl. DU56,S#1781,45 to 50 tons,Overall dimensions of platten is 60" wide x 40" front to back, 220/440 voltage, with 1 pattern rack.
M5053	Cutter,JUDELSHON,Baloney Slicer, 60",S#443.8, Mdl. 360, 16-1/2" dia. blade, blade sharpener, 2 HP roll Drive, 1/4 HP Sharpener Drive, 1 HP gearhead on Blade, 220/440 voltage,Max. Roll that may be cut is 14" dia. Manual change on width of cut by use of hand wheel with locking device, Scale on bed plate to set cutting widths.Judelshon is now Dusenbery.
L624	EMBROIDERY MACHINES, "HAPPY", (3) 16 head, (8) 4 head, all New in 1999, each are 10 needle, 360 sewing field, are able to run hats.All ran for 10 months 1 shift only. (1) 12 head machine, 8 needle 520 sewing field, new in 2001, ran for 4 months 1 shift only. All are Extra Wide Throw, and with Hoops & Boards. EXCELLENT Condition.
M4809	FEED HOPPER for Card,84" wide, RECONDITIONED, all steel construction, rotary comb, rotary doffer, duo motor drive, variable speed on aprons, with guards, NEW shaker chute, 5" delivery rolls
M3314	Feed, 48",RANDO, wood slat canvas feed & stripper apron & incline apron, with nylon spikes, rotary screen take to, pneumatic Y transition mounted on top, with drives and fan.
M5393	FOAM APPLICATOR & HOT ROLL, 207" wide, with (2) traversing spray applicators, Hot roll is 36" dia. x 207" wide, (4) Gas Burners, with pressure switch and Honeywell valves,complete with Control Panel and Drives.
L003	GARNETT ROLLS & NEW OR USED GARNETT PARTS
M4717	Needle Punch, JAMES HUNTER, Model 16, 105", double board, downstroke, 15 rows of needles per board, 3 needles per inch, 90 total needles per inch, 2-1/4" stroke, 15 HP drive, draw roll with PIV Drive, Louis Allis Adjusto Speed, 5' Feed Apron, Oiler, Feltometer.
M4596	Needle Punch,AUTOMATEX,2.5 meter,1989 year,2-1/2" downstroke,single board, draw rolls with pneumatic pressure, solid apron compression batt feed,152 needles/inch, on casters with hydraulic pump, automatic oiler, DC drive on draw rolls & batt feed, 230/460 voltage,with control panel & spare needle board.
L715	Needle Punch,JAMES HUNTER,65",Model 9, Down Stroke, Single Board,46 needle density.
M4683	Needle TESTER, with X-6 Recorder, powered draw rolls, 1/4 HP 115 volt drive on Punch, 1/4 HP 115 volt gearhead on draw rolls, 34 needles/inch.
L8	NON WOVEN THERMOBOND LINE & NEEDLE PUNCHED, with 1.5 M Hergeth Opener with feed apron, 1.9 M F O R Feeder and Card, James Hunter Corsslapper (2 M in x 3 M out) with Floor apron, Dilo Preneedler 2.5 M, Asselin Finishing Loom 2.7 M, 2.8 M Wind Up, Dilo Structuring Needle Loom 2.5 M 1000 strokes per min. 2.3 M Wind Up, 4 knife Hunter Slitter, 2.5 M Saturator, 2.5 M Gas Fired Oven Single Pass with Compression Roll & Wind UP, Latex Mixer.All Equipment was Reconditioned in 1997, currently set up to run Thermobond in one direction & Needle Punched Goods in another direction. Plant is capable of producing carpet, rugs, interlings, padding for carpet/automotives/furniture, felts, geotextiles and Thermobonding (from 120-1100 gr/sq M.)
L5	Nonwoven Line 5 meter wide, with Hunter Blending Line with (2) Mdl. 600 60" wide Blending Feeds, rotary comb & doffer, 36" wide Belt Blending Conveyor 24' long with variable speed drive, Hergeth 36" wide single beater blender, Hump Magnet, Stock Fan with 10 HP Drive. Fiber Controls "Snow Flaker" Card Feed Mdl. KL9x90, 90" wide with variable speed drive, Fiber Controls Stationary Screen Condenser, 90" wide, Hergeth Hollingsworth Card, 2.5 meters wide, Mdl. 64074924, feed roll over feed plate, 800mm dia. main cylinder, 600mm doffer, wire wound roll take-off, all drives, (1) Hergeth Crosslapper, Mdl. 10.7297/1, 2.5 meter wide x 5 meter laydown, variable speed drive, (1) Hergeth Floor Apron 5 meter wide 3.5 meters long, (1) Incline Feed apron, 5 meter wide, 10' long, (2) James Hunter Needle Looms, 210" wide, Mdl. 21, 111 needle density, automatic oiling, 30 HP variable speed main drive variable speed drives on feed rolls and draw rolls, (1) 210" wide Magnet, (1) Accumulator, J-Box, 210" (1) Edge Trim, 2-knife, positions for total of 8-knives, air pressure, 210", (1) Wind Up 2-roll, 48" dia. roll, hydraulic web aligner, variable speed drive, (1) Infra Red Heater Tenter Frame 210", (1) Hergeth Hollingsworth Shredmaster, (1) Hergeth 210" Battdrafter 4-zone. (1) Control System, Computerized, for complete line with menu for desired weights of products to be produced. INSTALLED can be inspected running.
L720	NONWOVEN LINE, 120",with (3) 36" Feeds with weigh pans, Belt Blending Conveyor, Single Beater Blender, Material Handling Fan, 36" Scrap Picker with Feed Apron, Hunter 60" Feed with Air Box, weigh pan, Garnett Feed Apron, Hunter Mdl. 40 Garnett, 60", 20/30 double 16" doffers, Duesburg Comb, Proctor & Schwartz Camelback Crosslapper, 130" laydown, 120" wide Floor Apron,2-roll compression head, single knife slitter, run out apron, 2-roll Wind up, all electrical starters, controls with motors & gear boxes.
M5343	NONWOVEN SAMPLE WEBBER LINE 66" wide, RANDO Mdl. 66BR Webber and Feeder, 60" Mdl. 729 PROCTOR & SCHWARTZ Prefeed, RANDO Mdl. 36 BS Opener Blender, TEXTILE RUBBER & CHEMICAL Foamer 1984, PARKINSON 72" 3 roll Windup. Photo is of Webber only. Other photos available upon request.
M5010	Opener,HERGETH, 1.5 meter (60") Mdl. FF127,3-blade Kirschner Beater with Pins, 7-1/2 HP Drive 1/4 HP Gearhead on Feed Roll & Feed Apron, 2' long feed apron, 230/460 voltage.
L0211	Picker, Edge Trim, 19" wide, 4-1/2" 7th wire wound feed roll, 11" dia. wire wound main, 9th, with fan.
M4784	Picker,PROCTOR & SCHWARTZ, Claw Tooth, 12 bar, 36" wide, with floor brake, 4" feed rolls, 36" x 96" long wood slat extended apron, 1-1/2 HP 7-1/2 HP 220/440 voltage, RECONDITIONED.
M4648	Picker,PROCTOR & SCHWARTZ,Claw Tooth, Same as above except 48" wide machine.
M1NEW	Pillow Blower,NEW, High Capacity,6' x 6' x 8' high, 5 HP Blowing fans, dual nozzle, foot control on blast gate for each fan, 2 duct shut offs, 1 HP gearhead on agitator, upper & lower electric eye level control, Control Panel.
M4819	Rag Tearing Machine, SCHIRP, 24", 2-cylinder, breaker section with 2-1/4" dia. single set wire wound feed rolls with 3 teeth per inch on horizontal and 3 teeth per inch on circumference, bit return, Schirp 21" feed, rotary comb, rotary doffer, spiked apron, with chain drive, plain bottom apron with Reeves variable speed drive, 1 HP 575 volt, 24" wide x 39" dia. finisher cylinder wire wound feed roll over feed plate, 4" dia. with drives.
M5001	Shredder, MUDRICK, M2-1, 42" S#810 with 9" dia. Pinned Feed roll over feed plate, 24 bar main cylinder with hooked teeth, feed apron 20 HP 220/440 volt main motor drive, RECONDITIONED
L1	SPINNING, COMPLETE OPEN END SPINNING PLANT AVAILABLE FOR IMMEDIATE SALE AS FOLLOWS: Opening & Cleaning, (2) Truetzschler Opening Feeders,(1) Truetzschler Opener Cleaner CNT3-097, (1) Rieter Opening Line with (2) Opener Cleaners, (1) Hollingsworth 1993 Opener, (1) Hollingsworth WZR Cleaner, 1987, (1) Sweet Jet Cleaner, (2) Rieter Auto Mixer Type 3/3 1984, (2) Fiberfilter II, (1) Truetzschler Bale Opener, 1995, (1) Horizontal Bale Press, CARDING: (6) Crosrol 40" Cards with 40" Coilers with Flats, Rieter Chute, (9) Hollingsworth 2000 Cards, 1993 year with Sliver Monitor, 40" Coilers, DRAWING: (10) Rieter RSB 851 Draw Frames, 1993 (42 x 16) may run 48", SPINNING: (5) Schlafhorst Open End Spinning Mdl. SE-8 (3) Double, 192 position; (3) Schlafhorst Open End Spinning Mdl. SE-8 (2) Double, 216 position; (2) Schlafhorst Open End Spinning Mdl. SE-9, 214 position; (1) Schlafhorst Open End Spinngin Mdl. SE-8, 96 position; TWISTING: (8) Volkman VTS-06 Twisters, 8" Traverse, 110 position; (1) Volkman VTS-06-S, 1993, 6" Traverse 110 position; (2) Volkman VTS-07 6" Traverse 168 position; (6) Murata Twisters, 6" Traverse, 1995, No. 37311 Type 373-11, 140 position; WINDING: (1) Savio Winder 24 position; (1) Sharer Schweitzer Mdl. 55M Doubler, 6 position. All Equipment Can be inspected in place and available immediately. Contact us for inspection.
L224	SPINNING, DREF III, 6-5/8" traverse on 9.5" x 1-1/8" tube, (1) 1991 12 heads with 9 runable 3 incomplete, 440 volt, also (1) 1987, 3 heads, 575 volts
M5244	Stitcher,FALES, 80", Mdl. Manifex 465, 13 heads, 6 needles/head, overhead feed 5 HP U.S. variable speed drive, 230/460 voltage.
M4702	Tacker, JAMES HUNTER Model 15, 105", with 5 rows of needles on 1/2" centers, 5 HP 230/460 volt.
M5340	Tacker,JAMES HUNTER, Model 15, 144" wide, 10 needles/inch, 5 rows needles on 1/2" centers with 2' feed apron & 2' discharge apron, (2) 2-1/2" dia. batt feed rolls, New 7-1/2 HP Siemens motor, 230/460 volt 1800 RPM with control panel.
M1965	Webber & Feed,RANDO, Mdl. 40B, 40", with all drives, fans.
L005	WEBBER & FEEDER, Sample, Rando, 18" wide, Webber is Mdl. D and Feeder is Model A converted to Model B.
M5280	Webber & Feeder,RANDO, 60" Mdl. 60B, with slitter, 4" knurled feed roll, 2 foot delivery apron.
M4795	Webber,RANDO, 84", Mdl. 84BR with Feeder, all drives, fans, 208/230/460 voltage, 1978 year.
M5284	Webber,RANDO, 90", ( Air Lay ), with Feed, conveyor, slitterhead and motors, 4" knurled feed and delivery roll, 14" condenser screen.
L1016	Webber,RANDO,Sample Line with Thermo Bonding Oven, 60", (3) 36" Fiber Controls Feeds with electronic weighing, belt blending conveyor, single beater blender, hump magnet, condensor, single card feed, 84" Whitin Card, Hunter Mdl. 9 Crosslapper 84" x 110", 60" Rando Webber outside air Mdl. 60B, 60" Electric Infra Red Oven, 4 knife Slitter.
M5168	WINDER, Leesona Model 50, 6" traverse, 3 degree, 51 minute cone, gear gain, 6 spindle sections.
M4835	WINDER, Turret,68" by World Wide Converting Machinery, 3 HP DC Drive with Brake, 3-Position, with controls, Pneumatic Pressure on Mandrel, DC Drive on Automatic Turn, Doffing Roller conveyor is 82" long x 68" wide.
M4834	WINDER,Surface, 86" wide, 18" diameter winding roll, will make a 40" dia. roll, Automatic Doffing, Control Panel, Yardage Counter, 3HP Reliance DC Drive, with 2 HP DC Drive on Winding Drum.
M4806	WINDING HEAD, 66" roll face, surface wind, air pressure on mandrel, with (2) 3" dia. mandrels, AC Inverter Drive, (2) Fife edge guiders, Fife power unit. RECONDITIONED.